C.A. Technologies FE-Line LCFM (Low CFM) HVLP Pressure Feed Spray Gun - CAT PackNo Cup (CP-FELCFM)1 Qt. Aluminum Cup (CP-FELCFM-303R2)850 ml 3M PPS Cup (CP-FELCFM-PPSR2)

Vendor: C.A. Technologies
Type: Spray Gun
Price: 477.92 - 839.16 (3 variants)

The Finish Excellence (FE-Line) LCFM HVLP model (FE-LCFM) is our low CFM lightweight ergonomic spray gun option. The FE-LCFM spray gun provides good atomization for portable applications.  The FE-Line LCFM’s standard setup is a 1.3 mm (fluid nozzle) x 1090 (air cap). This setup is designed for use with a low air consumption compressor with an output of 6 to 10 cfm. The 1090 air cap only uses 6 cfm, which enables the gun to be operated with a 2 HP compressor. The FE-LCFM is a great option for those looking for portability and the right equipment to use for onsite finishing projects!

Specifications:

• The FE-LCFM HVLP Pressure Feed Spray Gun CAT Packs include two air caps (1090 – 6 cfm & 1094 - 13 cfm) along with several different needle and nozzle sizes (0.8 mm, 1.3 mm & 1.7 mm), multi-purpose wrench, ratchet wrench with 3/8" socket, cleaning brush and your choice of no cup (Smart Pack), for use with an existing 2 Qt. remote cup or pressure tank, an aluminum 1 Qt. pressure feed cup with regulator or the 3M PPS Cup System 1 Qt. pressure feed cup with regulator all contained in a handy carrying case.
• Nozzle sets ranging from 0.5 mm – 1.7 mm
• Air Inlet - 1/4” NPS (m)
• Fluid Inlet – 3/8” NPS (m)
• Weight – 15 oz.
• Required atomizing air pressure may vary as required by air cap (15 psi - 33 psi)
• Required atomizing air volume is 6 – 13 cfm dependent on the air cap
• The air volume requirement (CFM) is dependent on Air Cap (21-1090 Low CFM air cap requires 6 cfm @ 15 psi) 

Additional Features & Benefits:

• The FE-LCFM offers stainless steel wet parts however it does not have the stainless steel sleeve inside the aluminum gun head which is most desirable with any water-base stain, coating, or adhesive.

*(Please note that the repair kit for the FE-LCFM is part # 10-140.  For more detailed information on the spray gun such as parts, setup & maintenance, please review the part sheet).

Part Sheet – FE-Line LCFM (FE-LCFM)